This low profile, super heavy duty strobe operates from 12-24 VDC to produce 10 or 16 joules and 80 double or 65 quad flashes per minute. i.beam™ LED monitors circuit board performance and flash tube performance on each cycle. The base is die cast and all electronics are encapsulated in epoxy to protect against vibration and the elements. There are two mounting options: one inch pipe and 3-point flange. Field flash tube replacement is trouble free with a thread-on lens and snap out connector. This strobe meets SAE J1318 Class 2 requirements and is manufactured in the U.S.A. by ECCO--certified ISO-9001.
WARRANTY
Part Warranty : 2 Years
Heavy Duty
PART ID
JOULES
(Double/Quad)
VOLTAGE
FPM
(Double/Quad)
6750
10/16
N/A
80/65
Max Current (Amps)
Max Power (Watts)
N/A
N/A
SERIES DESCRIPTION
Low Profile Switchable i.beam™
PART DESCRIPTION
This low profile, super heavy duty strobe operates from 12-24 VDC to produce 10 or 16 joules and 80 double or 65 quad flashes per minute. i.beam™ LED monitors circuit board performance and flash tube performance on each cycle. The base is die cast and all electronics are encapsulated in epoxy to protect against vibration and the elements. There are two mounting options: one inch pipe and 3-point flange. Field flash tube replacement is trouble free with a thread-on lens and snap out connector. This strobe meets SAE J1318 Class 2 requirements and is manufactured in the U.S.A. by ECCO--certified ISO-9001.
